Device Demo


What’s in the Box

  1. RevoWrap Portable Electric Wrap Roller

  2. Quick Start Card

  3. Owner’s Manual

  4. USB Type-A to USB Type-C Charging Cable

Please note: The device can only be charged with a USB Type-A to USB Type-C cable. It is best to use the one provided or your own if you have it. It will not charge with a USB Type-C to USB Type-C cable.

Product Overview

External Controls & Features

  • Power Button: On/Off, located on the bottom of the device

  • Charging Port: Located on the bottom of the device

  • Direction Buttons: Forward and reverse, located on the side below the logo

  • Status LED: Indicates charging and battery levels; located within the white-lit direction buttons

  • Wrap Feed Slot: Guides the wrap into the roller chamber, the long opening on the top side of the device

  • Wrap Spindle: Grips and coils the wrap, the rotating center spindle

Quick Start Guide

  1. Charge the device fully using a reputable charger or the included USB-C charging cable. Full charge in 2 hours.

  2. Power ON: Press the Power button. Direction buttons will flash to show charge level (see section below on Indicator lights for guidance)

  3. Prepare your wrap: Untwist and straighten for the smoothest rolling.

  4. Feed the wrap into the feed slot.

  5. Press and hold a direction button: Guide the fabric lightly with one hand while holding the device with the other. If a jam occurs, press the opposite button to reverse and untangle.

  6. Remove the roll by pulling straight off the spindle. If the loop catches, free it before removing the roll.

  7. Power OFF when finished.

Indicator Lights

Indicator LEDs are located within the two directional buttons.

In Use

  • Solid white: Ready for use

  • Three flashes: Battery full

  • Two flashes: Battery 50–75%

  • Four fast flashes: Battery below 50%

When Charging

  • Left button illuminated: Charging

  • Right button illuminated: Fully charged

Maintenance & Care

Recharge regularly and avoid fully depleting the battery for best performance. Do not pull excessively hard on the wrap while rolling; this makes removal easier. If the wrap spindle disconnects, this is normal. It is designed to detach under pressure to prevent damage. Simply press it back into place. Refer to the tutorial video if needed.

If you require further assistance, please reach out to us through our social media channels or the Contact Us page.